Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: Chip ResistorDescription: 400 Vishay RCEC series is a professional series of Vishay thick film power resistors for the RCEC series. Resistors can be configured with 2 or 3 resistors. Non inductive screw fixed output high power/volume ratio through-hole installation size - Sfernice series| RCH 5 | RCH 10 | RCH 25 | RCH 50 L | 16.6 | 19 | 28 | 50 W | 9 | 11 | 14 | 15.5 H | 16.4 | 20.6 | 27.5 | 29.4 P | 10.2 | 12.7 | 18.3 | 33 F | 11.3 | 14.3 | 18.3 | 39.7 T | 12.5 | 15.9 | 19.8 | 21.4 S | 5.3 | 5 | 7.7 | 8 Ø D | 2.4 | 2.4 | 3.2 | 3.2 | M2 | M2 | M3 | M3 Main Features - Overload Duration| RCH25 | RCH50 | BDS100 | BDS250 1 s | 375W | 750W | 200W | 1500W 2 s | 300W | 600W | 150W | 1250W 5 s | 125W | 250W | 125W | 1000W 10 s | 75W | 150W | 100W | 750W For every one degree increase in ambient temperature above 25 ° C, the allowable overload is reduced by 1%. The main feature table is only applicable to resistors appropriately installed on heat sinks, with a thermal resistance of 1 ° C/W at rated powers of 25 and 50W, 0.7 ° C/W at rated power of 100W, and 0.28 ° C/W at rated power of 250W. This data is only valid when hot oil grease is used and the resistor is correctly tightened by the mounting screw. Tightening torque - RCH25 | RCH50 | BDS100 | BDS250 0.7Nm | 1Nm | 2Nm | 2Nm2756 -
![]()
Category: Chip ResistorDescription: 750 W Vishay RCEC The Vishay RCEC 750 power resistor series is made of alumina substrate and metal ceramic resistor elements, packaged in a filled epoxy resin box. The RCEC 750 power resistor has a high power to volume ratio and is equipped with a cooling system without external radiation. Maximum 750 W rated power, no inductance, easy assembly, 400N self calibration pressure, cooling size through auxiliary radiator (not included) - Sfernice series| RCH 5 | RCH 10 | RCH 25 | RCH 50 L | 16.6 | 19 | 28 | 50 W | 9 | 11 | 14 | 15.5 H | 16.4 | 20.6 | 27.5 | 29.4 P | 10.2 | 12.7 | 18.3 | 33 F | 11.3 | 14.3 | 18.3 | 39.7 T | 12.5 | 15.9 | 19.8 | 21.4 S | 5.3 | 5 | 7.7 | 8 Ø D | 2.4 | 2.4 | 3.2 | 3.2 | M2 | M2 | M3 | M3 Main Features - Overload Duration| RCH25 | RCH50 | BDS100 | BDS250 1 s | 375W | 750W | 200W | 1500W 2 s | 300W | 600W | 150W | 1250W 5 s | 125W | 250W | 125W | 1000W 10 s | 75W | 150W | 100W | 750W For every one degree increase in ambient temperature above 25 ° C, the allowable overload is reduced by 1%. The main feature table is only applicable to resistors appropriately installed on heat sinks, with a thermal resistance of 1 ° C/W at rated powers of 25 and 50W, 0.7 ° C/W at rated power of 100W, and 0.28 ° C/W at rated power of 250W. This data is only valid when hot oil grease is used and the resistor is correctly tightened by the mounting screw. Tightening torque - RCH25 | RCH50 | BDS100 | BDS250 0.7Nm | 1Nm | 2Nm | 2Nm1027 -
![]()
Category: Chip ResistorDescription: 750 W Vishay RCEC 系列 Vishay RCEC 750 功率电阻器由氧化铝基片和金属陶瓷电阻元件制成，采用填充环氧树脂箱封装。 RCEC 750 功率电阻器具有高功率/容积比，且具有冷却系统，无外部辐射。 最大 750 W 额定功率 无电感性 简易组装 400N 自校准压力 通过辅助散热器（不包括）冷却 尺寸 --- Sfernice 系列 | RCH 5 | RCH 10 | RCH 25 | RCH 50 L | 16.6 | 19 | 28 | 50 W | 9 | 11 | 14 | 15.5 H | 16.4 | 20.6 | 27.5 | 29.4 P | 10.2 | 12.7 | 18.3 | 33 F | 11.3 | 14.3 | 18.3 | 39.7 T | 12.5 | 15.9 | 19.8 | 21.4 S | 5.3 | 5 | 7.7 | 8 ØD | 2.4 | 2.4 | 3.2 | 3.2 | M2 | M2 | M3 | M3 主要特点 --- 过载持续时间 | RCH25 | RCH50 | BDS100 | BDS250 1 s | 375W | 750W | 200W | 1500W 2 s | 300W | 600W | 150W | 1250W 5 s | 125W | 250W | 125W | 1000W 10 s | 75W | 150W | 100W | 750W 在 25° C 以上环境温度每升高一度，允许的过载便减少 1%。 主要特点表仅适用于适当安装在散热片上的电阻器，其热阻在额定功率为 25 和 50W 时为 1°C/W，额定功率为 100W 时为 0.7°C/W，额定功率为 250W 时为 0.28° C/W。 该数据仅当使用热油脂且电阻器通过安装螺钉正确拧紧时有效。 拧紧扭矩 --- RCH25 | RCH50 | BDS100 | BDS250 0.7Nm | 1Nm | 2Nm | 2Nm1871 -
![]()
Category: Chip ResistorDescription: 400 瓦 Vishay RCEC 系列 RCEC 系列的专业系列 Vishay 厚膜功率电阻器。 电阻器可配置，带 2 个或 3 个电阻器。 无电感性 螺钉固定输出 高功率/容积比 通孔安装 尺寸 --- Sfernice 系列 | RCH 5 | RCH 10 | RCH 25 | RCH 50 L | 16.6 | 19 | 28 | 50 W | 9 | 11 | 14 | 15.5 H | 16.4 | 20.6 | 27.5 | 29.4 P | 10.2 | 12.7 | 18.3 | 33 F | 11.3 | 14.3 | 18.3 | 39.7 T | 12.5 | 15.9 | 19.8 | 21.4 S | 5.3 | 5 | 7.7 | 8 ØD | 2.4 | 2.4 | 3.2 | 3.2 | M2 | M2 | M3 | M3 主要特点 --- 过载持续时间 | RCH25 | RCH50 | BDS100 | BDS250 1 s | 375W | 750W | 200W | 1500W 2 s | 300W | 600W | 150W | 1250W 5 s | 125W | 250W | 125W | 1000W 10 s | 75W | 150W | 100W | 750W 在 25° C 以上环境温度每升高一度，允许的过载便减少 1%。 主要特点表仅适用于适当安装在散热片上的电阻器，其热阻在额定功率为 25 和 50W 时为 1°C/W，额定功率为 100W 时为 0.7°C/W，额定功率为 250W 时为 0.28° C/W。 该数据仅当使用热油脂且电阻器通过安装螺钉正确拧紧时有效。 拧紧扭矩 --- RCH25 | RCH50 | BDS100 | BDS250 0.7Nm | 1Nm | 2Nm | 2Nm5920
